TUFNOL Technical information
Weights of TUFNOL Laminated rods and tubes
Specific Gravity (Relative density)
|
TUFNOL Grade |
Specific gravity
(g/cm3) |
|
Tufnol paper grades |
|
|
Swan |
1.36 |
|
RLP/1, RLP/3 |
1.21 |
|
RLP/2 |
1.27 |
|
TUFNOL cotton fabric grades |
|
|
Carp, 6F/45, Whale, Crow, Vole |
1.36 |
|
RLF/3, RLF/2, RLF/3 |
1.25 |
|
TUFNOL Bearing grades |
|
|
Bear, CBM2008 |
1.32 |
|
2F/3/PTFE |
1.50 |
|
TUFNOL glass fabric grades |
|
|
10G/24, 10G/40, 10G/42, 10G/44, |
1.90 |
|
10G/41 |
1.95 |
|
RLG/1, RLG/3, RLG/7 |
1.80 |
TUFNOL RODS
Calculate the approximate weight of TUFNOL rods as follows:
Calculate weight in kg.
D = diameter in mm
L = length in mm
G = specific gravity for grade (see above)
Weight in kg = 0.007854 x D2 x L x G
Calculate weight in pounds
D = diameter in inches
L = length in inches
G = specific gravity for grade (see above)
Weight in pounds = 0.02837 x D2 x L x G
TUFNOL TUBES
Calculate the approximate weight of TUFNOL tubes as follows:
Calculate weight in kg.
D = outside diameter in mm
d = inside diameter in mm
L = length in mm
G = specific gravity for grade (see above)
Weight in kg = 0.007854 x (D2 – d2) x L x G
Calculate weight in pounds
D = diameter in inches
L = length in inches
G = specific gravity for grade (see above)
Weight in pounds = 0.02837 x (D2 – d2) x L x G
Back to Home page
Tufnol Composites Ltd, Wellhead Lane, Perry Barr, Birmingham B42 2TB, United Kingdom.
Quality Registration BS EN ISO 9001:2000, BS EN 9100:2003 and AS 9100 Reg. No. FM 90942
The information given here is believed to be correct, but completeness and accuracy are not guaranteed. The user shall be fully responsible for determining the suitability of products for the intended use.
| Home page | Legal page | Contact us |
TUFNOL is a Registered Trade Mark.
Copyright © 2000 – 2005 Tufnol Composites Ltd. All rights reserved.
|
Site Map