Grade 6F/45 Standard Sizes

STANDARD SIZES for TUFNOL Grade 6F/45

 

Despatch is normally ex-stock for items shown in BOLD.  Other items may require to be made to order.

Sizes not listed may be available, subject to special order.

SHEETS

Thickness

WHOLE SHEETS

HALF SHEETS

 

Nominal Size

Nominal Size

mm

mm

mm

0.4

1200 x 1200

1200 X 600

0.6

1200 x 1200

1200 X 600

0.8

1200 x 1200

1200 X 600

1

1200 x 1200

1200 X 600

1.6

1200 x 1200

1200 X 600

2

1200 x 1200

1200 X 600

2.5

1200 x 1200

1200 X 600

3

1200 x 1200

1200 X 600

3.2

1200 x 1200

1200 X 600

4

1200 x 1200

1200 X 600

4.8

1200 x 1200

1200 X 600

5

1200 x 1200

1200 X 600

6

1200 x 1200

1200 X 600

6.4

1200 x 1200

1200 X 600

8

1200 x 1200

1200 X 600

9.5

1200 x 1200

1200 X 600

10

1200 x 1200

1200 X 600

12

1200 x 1200

1200 X 600

12.7

1200 x 1200

1200 X 600

14

1200 x 1200

1200 X 600

15

1200 x 1200

1200 X 600

16

1200 x 1200

1200 X 600

19

1200 x 1200

1200 X 600

20

1200 x 1200

1200 X 600

22

1200 x 1200

1200 X 600

25

1200 x 1200

1200 X 600

25.4

1200 x 1200

1200 X 600

30

1200 x 1200

1200 X 600

32

1200 x 1200

1200 X 600

35

1200 x 1200

1200 X 600

40

1200 x 1200

1200 X 600

45

1200 x 1200

1200 X 600

50

1200 x 1200

1200 X 600

55

1200 x 1200

1200 X 600

60

1200 x 1200

1200 X 600

70

1200 x 1200

1200 X 600

 Other sizes up to 76.2mm (3 inches) thick can readily be made to order.

 

Standard sheet size is 1200 x 1200mm approximately.  Sheets 1525 x 1200mm approximately can also be made to order.

 

Thicknesses below 1.0mm have a special matt finish.

 

Minimum production quantities may apply for certain items.

 

ROUND RODS

Diameter

Nominal Length

Type

mm

mm

 

6

1200

Machined from sheet

8

1200

Machined from sheet

10

1200

Machined from sheet

12

1200

Machined from sheet

12.7

1200

Rolled and moulded

16

1200

Rolled and moulded

19

1200

Rolled and moulded

20

1200

Rolled and moulded

22

1200

Rolled and moulded

25

1200

Rolled and moulded

25.4

1200

Rolled and moulded

30

1200

Rolled and moulded

32

1200

Rolled and moulded

35

1200

Rolled and moulded

38

1200

Rolled and moulded

40

1200

Rolled and moulded

45

1200

Rolled and moulded

50

1200

Rolled and moulded

Other sizes up to 50.8mm (2 inches) diameter can readily be made to order.

Standard lengths are 1200mm approximately.  

 

Rods under 12.7mm diameter are normally machined from sheet and have flat, in-plane laminations.  Rods 12.7 diameter and over are rolled and moulded individually.  Rolled and moulded rods under 12.7 diameter can be made to order.

 

Minimum production quantities may apply for certain items.

 

ROUND TUBES
 

Thousands of sizes available up to 228.4mm (9 inches) outside diameter.  Refer to TUFNOL for full details.

 

Standard lengths are 1200mm approximately for tubes up to 105mm outside diameter, and 585mm long approximately for larger diameters.

 

Minimum production quantities may apply for certain items.

 

OTHER SECTIONS
 

SQUARE and RECTANGULAR BAR

Rolled and moulded square and rectangular bar is made in sizes up to 76.2 x 88.9mm (3 inches x 3.1/2 inches).  Refer to TUFNOL for details.

 

Standard lengths are 1200mm approximately.

 

Minimum production quantities may apply for certain items.

 

HEXAGONAL BAR

Hexagonal bar is rolled and moulded and the across flats dimensions are machined to suit Metric, Whitworth or other standard hexagon sizes.

Size range from 0.445 to 1.100 inches (11.3 to 28.0mm) across flats

 

Standard lengths are 1200mm approximately.

 

Minimum production quantities may apply for certain items.

 

SQUARE and RECTANGULAR TUBES

Many sizes available, from 4.8 x 4.8mm to 69.8 x 69.8mm (3/16 x 3/16 inches to 2 3/4" x 2 ¾ inches) outside dimension. Refer to TUFNOL for full details.

 

Standard lengths are 1200mm approximately for tubes up to 105mm outside diameter, and 585mm long approximately for larger diameters.

 

 Minimum production quantities may apply for certain items.

 

ANGLE SECTION

Angles are made in sizes from 6.3 x 9.5mm up to 149.2 x 149.2mm (1/4 x 3/8 inches to 5 7/8 x 5 7/8 inches). Smaller sizes may be cut from rectangular tube, larger sizes moulded individually.  Refer to TUFNOL for full details.

 

Standard lengths are 1200mm approximately for tubes up to 105mm outside dimension, and 585mm long approximately for larger sizes.

 

 Minimum production quantities may apply for certain items.

 

CHANNEL SECTION

Channel sections are cut from rectangular tube.  See size range above (deduct 3.2mm (1/8 inch) from relevant dimension to allow for tool cut.)  Refer to TUFNOL full details.

 

Standard lengths: see rectangular tube.

 

Minimum production quantities may apply for certain items.

 

 

Back to main TUFNOL Grade 6F/45 page

Back to Home page

 

A full machining service is available from Tufnol for this and many other engineering plastics and composites.

 

Tufnol Composites Ltd, Wellhead Lane, Perry Barr, Birmingham B42 2TB, United Kingdom.

Quality Registration BS EN ISO 9001:2000, BS EN 9100:2003 and AS 9100 Reg. No. FM 90942

 

The information given here is believed to be correct, but completeness and accuracy are not guaranteed. The user shall be fully responsible for determining the suitability of products for the intended use.   

| Home page | Legal page | Contact us
TUFNOL is a Registered Trade Mark. 
Copyright © 2000 – 2005 Tufnol Composites Ltd. All rights reserved.

Go to Home Page
   Web Design & SEO by WebsynergiSite Map Copyright © 2008 Tufnol Composites Ltd. All rights reserved.