STANDARD SIZES for Crow Brand TUFNOL

Despatch is normally ex-stock for items shown in BOLD.  Other items may require to be made to order.

Sizes not listed may be available, subject to special order.

SHEETS

Thickness	WHOLE SHEET	HALF SHEET
	Nominal Size	Nominal Size
mm	mm	mm
1	1200 x 1200	1200 X 600
1.6	1200 x 1200	1200 X 600
2	1200 x 1200	1200 X 600
2.5	1200 x 1200	1200 X 600
3	1200 x 1200	1200 X 600
3.2	1200 x 1200	1200 X 600
4	1200 x 1200	1200 X 600
4.8	1200 x 1200	1200 X 600
5	1200 x 1200	1200 X 600
6	1200 x 1200	1200 X 600
6.4	1200 x 1200	1200 X 600
8	1200 x 1200	1200 X 600
9.5	1200 x 1200	1200 X 600
10	1200 x 1200	1200 X 600
12	1200 x 1200	1200 X 600
12.7	1200 x 1200	1200 X 600
14	1200 x 1200	1200 X 600
15	1200 x 1200	1200 X 600
16	1200 x 1200	1200 X 600
19	1200 x 1200	1200 X 600
20	1200 x 1200	1200 X 600
25	1200 x 1200	1200 X 600
25.4	1200 x 1200	1200 X 600
32	1200 x 1200	1200 X 600
30	1200 x 1200	1200 X 600
35	1200 x 1200	1200 X 600
40	1200 x 1200	1200 X 600
45	1200 x 1200	1200 X 600
50	1200 x 1200	1200 X 600
55	1200 x 1200	1200 X 600
60	1200 x 1200	1200 X 600
70	1200 x 1200	1200 X 600
80	1200 x 1200	1200 X 600
90	1200 x 1200	1200 X 600
100	1200 x 1200	1200 X 600
110	1200 x 1200	1200 X 600
120	1200 x 1200	1200 X 600
140	1200 x 1200	1200 X 600
160	1200 x 1200	1200 X 600
180	1200 x 1200	1200 X 600
200	1200 x 1200	1200 X 600
220	1200 x 1200	1200 X 600
225	1200 x 1200	1200 X 600
228.4	1200 x 1200	1200 X 600

Other sizes up to 228.4mm (9 inches) thick can readily be made to order.

Standard sheet size is 1200 x 1200mm approximately. 

Sheets 1525 x 1200mm approximately can also be made to order.

Minimum production quantities may apply for certain items.

ROUND RODS

Crow brand rods may be in stock, but are normally made to order.

Sizes not listed may be available, subject to special order.

Diameter	Nominal Length
mm	mm
6	1200	Machined from sheet
8	1200	Machined from sheet
10	1200	Machined from sheet
12	1200	Machined from sheet
12.7	1200	Rolled and moulded
15	1200	Rolled and moulded
16	1200	Rolled and moulded
19	1200	Rolled and moulded
20	1200	Rolled and moulded
22	1200	Rolled and moulded
25	1200	Rolled and moulded
25.4	1200	Rolled and moulded
30	1200	Rolled and moulded
32	1200	Rolled and moulded
35	1200	Rolled and moulded
38	1200	Rolled and moulded
40	1200	Rolled and moulded
45	1200	Rolled and moulded
50	1200	Rolled and moulded
51	1200	Rolled and moulded
55	1200	Rolled and moulded
60	1200	Rolled and moulded
63.5	1200	Rolled and moulded
65	1200	Rolled and moulded
70	1200	Rolled and moulded
76	1200	Rolled and moulded
80	1200	Rolled and moulded
90	1200	Rolled and moulded
100	1200	Rolled and moulded
110	600	Rolled and moulded
120	600	Rolled and moulded
140	600	Rolled and moulded
150	600	Rolled and moulded

Other sizes up to 228.6mm (9 inches) diameter can readily be made to order.

Standard lengths are 1200mm approximately for rods up to 105mm diameter, and 585mm long approximately for larger diameters. 

Rods under 12.7mm diameter are normally machined from sheet and have flat, in-plane laminations.  Rods 12.7 diameter and over are rolled and moulded individually.  Rolled and moulded rods under 12.7 diameter can be made to order.

Minimum production quantities may apply for certain items.

ROUND TUBES

Thousands of sizes available up to 228.4mm (9 inches) outside diameter.  Refer to TUFNOL for full details.

Standard lengths are 1200mm approximately for tubes up to 105mm outside diameter, and 585mm long approximately for larger diameters.

 Minimum production quantities may apply for certain items.

OTHER MOULDED SECTIONS

Not normally made.  See Whale Brand Tufnol.

Back to main Crow Brand TUFNOL page

Back to Home page

A full machining service is available from Tufnol for this and many other engineering plastics and composites.

Tufnol Composites Ltd, Wellhead Lane, Perry Barr, Birmingham B42 2TB, United Kingdom.

Quality Registration BS EN ISO 9001:2000, BS EN 9100:2003 and AS 9100 Reg. No. FM 90942

The information given here is believed to be correct, but completeness and accuracy are not guaranteed. The user shall be fully responsible for determining the suitability of products for the intended use.