Grade 2P/20 Standard Sizes

STANDARD SIZES for TUFNOL Grade 2P/20

Sizes not listed may be available, subject to special order.

SHEETS

Thickness

WHOLE SHEETS

HALF SHEETS

 

Nominal Size

Nominal Size

mm

mm

mm

0.8

1200 x 1200

1200 X 600

1

1200 x 1200

1200 X 600

1.6

1200 x 1200

1200 X 600

2

1200 x 1200

1200 X 600

3

1200 x 1200

1200 X 600

3.2

1200 x 1200

1200 X 600

Standard sheet size is 1200 x 1200mm approximately.  Sheets 1525 x 1200mm approximately can also be made to order.

 

Thicknesses below 1.0mm have a special matt finish. 

 

As this grade is intended for punched parts, thicknesses above 3.2mm are not produced.  Kite Brand TUFNOL has similar electrical insulation properties and is available in a wider range of thicknesses.

 

Minimum production quantities may apply for certain items.

 

 

Back to main TUFNOL Grade 2P/20 page

Back to Home page

 

A full machining service is available from Tufnol Composites Ltd for this and many other engineering plastics and composites.

 

Tufnol Composites Ltd, Wellhead Lane, Perry Barr, Birmingham B42 2TB, United Kingdom.

Quality Registration BS EN ISO 9001:2000, BS EN 9100:2003 and AS 9100 Reg. No. FM 90942

 

The information given here is believed to be correct, but completeness and accuracy are not guaranteed. The user shall be fully responsible for determining the suitability of products for the intended use.   

| Home page | Legal page | Contact us
TUFNOL is a Registered Trade Mark. 
Copyright © 2000 – 2005 Tufnol Composites Ltd. All rights reserved.

Go to Home Page
   Web Design & SEO by WebsynergiSite Map Copyright © 2008 Tufnol Composites Ltd. All rights reserved.